Pull to refresh

Fourth Order Low-pass Filter with One Op Amp

Circuit designManufacture and development of electronicsDIYElectronics for beginners
Tutorial
Amateur vs Pro

The idea to build a 4th order low-pass filter looks simple: add one more feedback loop. But there are pitfalls, as always.

Basic equations for fourth order low-pass filters


Assuming ideal Op Amp, the transfer function of a third order low-pass filter is:

                             A
H(s) = ———————————————————————————————————————————————
       (1 + s/(Q₁ ω₁) + s²/ω₁²)(1 + s/(Q ω₂) + s²/ω₂²)

where:
A – DC gain;
ω₁ – radial frequency of the first stage, K1 × ω;
ω₂ – radial frequency of the second stage, K2 × ω;
Q₁ – quality factor of the first stage;
Q₂ – quality factor of the second stage;
ω – pass-band radial frequency of the filter.

Open brackets to get another form of the transfer function:

                          A
H(s) = ———————————————————————————————————————
       1 + ps1 s + ps2 s^2 + ps3 s^3 + ps4 s^4

ps1 = 1 / (Q₁ ω₁) + 1 / (Q₂ ω₂)
ps2 = 1 / (Q₁ ω₁ Q₂ ω₂) + 1/ω₁² + 1/ω₂²
ps3 = 1 / (Q₁ ω₁ ω₂²) + 1 / (ω₁² Q₂ ω₂)
ps4 = 1 / (ω₁² ω₂²)

Knowing −3 dB frequency and filter type, we can get K1, Q1, K2 and Q2 from tables in books [1] or compute them.

Circuits


Let’s start by adding one more feedback loop to well-known Multiple Feedback (MFB) and Sallen-Key (SK) second order low-pass filter topologies.
Second Order Topologies
Second Order Topologies

Fourth Order Topologies
Fourth Order Topologies

Write equations and try to solve them.

Surprise: there are no solutions with positive component values. Varying gain, it turns out that there are solutions only for the Sallen-Key topology when gain is more than 3.

The equations for MFB look like:

psN = a + b + c + d

The equations for SK look like:

psN = a + b + c − d

So, possible, we need to find a way to add members with the negative sign to the equations.

Fourth Order One Op Amp Sallen-Key Low-pass Filter


For SK, a resistor divider helps. Now the equations have solutions with gains around 1.
Fourth Order Sallen-Key Low-pass Filter
Fourth Order Sallen-Key Low-pass Filter

Design Equations


The transfer function is:

                          A
H(s) = ———————————————————————————————————————
       1 + ps1 s + ps2 s^2 + ps3 s^3 + ps4 s^4

The factors are:

      R6 (C1 R1 (R2 + R3) + C2 (R1 + R2) (R3 + R4) + C4 (R4 R5 + (R1 + R2 + R3) (R4 + mR5)))
      − R4 R7 (C1 R1 + C3 (R1 + R2 + R3))
ps1 = ——————————————————————————————————————————————————————————————————————————————————————
                                      (R1 + R2 + R3 + R4) R6

      R6 (R1 C1 (R2 C2 (R3 + R4) + C4 ((R2 + R3 + R4) R5 + (R2 + R3) R4))
      + C4 (C2 (R1 + R2) ((R3 + R4) R5 + R3 R4) + R4 R5 C3 (R1 + R2 + R3)))
      − C3 R4 R7 (R1 C1 (R2 + R3) + R3 C2 (R1 + R2))
ps2 = —————————————————————————————————————————————————————————————————————
                           (R1 + R2 + R3 + R4) R6

      C4 R6 (R1 R2 C1 C2 (R4 R5 + R3 (R5 + R4)) + R4 R5 C3 (C1 R1 (R2 + R3) + R3 C2 (R1 + R2)))
      − R1 R2 R3 R4 R7 C1 C2 C3
ps3 = —————————————————————————————————————————————————————————————————————————————————————————
                                       (R1 + R2 + R3 + R4) R6

      R1 R2 R3 R4 R5 R6 C1 C2 C3 C4
ps4 = —————————————————————————————
         (R1 + R2 + R3 + R4) R6

the DC gain is:

    R4 (R7 / R6 + 1)
A = —————————————————
    R1 + R2 + R3 + R4

But there is another problem: the circuit is very sensitive to component tolerances.

A fourth order Butterworth filter circuit is shown with a pass-band of 1 kHz and a gain of 2 with computed and the closest standard component values.
4 Pole Sallen-Key Low-pass Filter, Simulation
4 Pole Sallen-Key Low-pass Filter, Simulation

Thus, this 4th pole SK topology is useless in practice. Drop it.

Third Order One Op Amp Multiple Feedback Low-pass Filter


For MFB topology, members with negative signs can be added with positive feedback.
Fourth Order Multiple Feedback Low-pass Filter
Fourth Order Multiple Feedback Low-pass Filter

Design Equations


The transfer function is:

                          A
H(s) = ———————————————————————————————————————
       1 + ps1 s + ps2 s^2 + ps3 s^3 + ps4 s^4

The factors are:

      R7 (R1 C1 (R2 + R3) + C2 (R1 + R2) (R3 + R4) + C4 (R4 R5 + (R4 + R5) (R1 + R2 + R3)))
      − R4 R6 (C1 R1 + C3 (R1 + R2 + R3))
ps1 = —————————————————————————————————————————————————————————————————————————————————————
                                 (R1 + R2 + R3) R7 − R4 R6

      R7 (R1 R2 C1 C2 (R3 + R4) + C4 (R1 C1 (R4 R5 + (R2 + R3) (R4 + R5))
      + C2 (R1 + R2) (R4 R5 + R3 (R4 + R5)) + R4 R5 C3 (R1 + R2 + R3)))
      − C3 R4 R6 (C1 R1 (R2 + R3) + C2 R3 (R1 + R2))
ps2 = ———————————————————————————————————————————————————————————————————
                           (R1 + R2 + R3) R7 − R4 R6

      R7 C4 (R1 R2 C1 C2 (R4 R5 + R3 (R4 + R5)) + R4 R5 C3 (R1 C1 (R2 + R3) + R3 C2 (R1 + R2)))
      − R1 R2 R3 R4 R6 C1 C2 C3
ps3 = —————————————————————————————————————————————————————————————————————————————————————————
                                   (R1 + R2 + R3) R7 − R4 R6

      R1 R2 R3 R4 R5 R7 C1 C2 C3 C4
ps4 = —————————————————————————————
        (R1 + R2 + R3) R7 − R4 R6

the DC gain is:

            R3 (R6 + R7)
A = − —————————————————————————
      (R1 + R2 + R3) R7 − R4 R6


Example


Let’s compute a unity gain fourth order Butterworth filter with 150 kHz pass-band.

Set R = R2 = R3 = R4 = 1 kOhm (E96) to optimize our bill of materials.

The DC gain now is:

            R3 (R6 + R7)              R (R6 / R7 + 1)
A = − ————————————————————————— = − ————————————————————
      (R1 + R2 + R3) R7 − R4 R6     R1 + R (2 − R6 / R7)

Thus, R6 / R7 = 2 helps to simplify the equation.
Choose R6 = 1.18 kOhm (E96), R7 = 590 Ohm (E96).

     (A (2 − R6 / R7) − 1 − R6 / R7) R   (−1 × (2 − 2) − 1 − 2) × 1 kOhm
R1 = ————————————————————————————————— = ——————————————————————————————— = 3000 ≈ 3.01 kOhm (E96)
                      A                                 −1

For a 4th order Butterworth filter K1 = K2 = 1, so ω1 and ω2 are equal to its radial pass-band frequency, and Q1 = 0.5412, Q2 = 1.3066.

         1         1                  1                           1
ps1 = ——————— + ——————— = ————————————————————————— + ————————————————————————— ≈ 2.773e-6
      Q₁ K1 ω   Q₂ K2 ω   0.5412 × 1 × 2π × 150 kHz   1.3066 × 1 × 2π × 150 kHz

             1             1        1                              1                                      1                   1
ps2 = ——————————————— + ——————— + —————— = ————————————————————————————————————————————————————— + ————————————————— + —————————————————— ≈ 3.834e-12
      K1 ω Q₁  K2 ω Q₂  (K1 ω)²   (K2 ω)²  1 × 2π × 150 kHz × 0.5412 × 1 × 2π × 150 kHz × 1.3066   (1× 2π ×150 kHz)²   (1 × 2π × 150 kHz)²

             1                 1                              1                                                1
ps3 = ——————————————— + ——————————————— = ———————————————————————————————————————————— + ——————————————————————————————————————————————— ≈ 3.121e-18
      Q₂ K2 ω (K1 ω)²   Q₁ K1 ω (K2 ω)²   1.3066 × 1 × 2π × 150 kHz × (1×2 π×150 kHz)²   0.5412 × 1 × 2π × 150 kHz × (1 × 2π × 150 kHz)²

           1                           1
ps4 = ———————————— = —————————————————————————————————————— ≈ 1.267e-24
      (K1 ω K2 ω)²   (1 × 2π × 150 kHz × 1 × 2π × 150 kHz)²


There are 4 equations and 5 unknown values: C1, C2, C3, C4, R5.
We can set an R5 value and solve the equations numerically to find C1, C2, C3, C4.

Let’s set R4 = 154 Ohm (E96).
The solution is:

C1 ≈ 1.341 nF ≈ 1.3 nF (E24)
C2 ≈ 1.286 nF ≈ 1.3 nF (E24)
C3 ≈ 1.782 nF ≈ 1.8 nF (E24)
C4 ≈ 2.677 nF ≈ 2.7 nF (E24)

Simulation confirms that the solution is correct and that sensitivity to component tolerances is acceptable.
Fourth Order Multiple Feedback Low-pass Filter, Frequency response
Fourth Order Multiple Feedback Low-pass Filter, Frequency response

Magnitude of the input impedance is defined by the R1 value.
Fourth Order Multiple Feedback Low-pass Filter, Input impedance
Fourth Order Multiple Feedback Low-pass Filter, Input impedance

Step response confirms that the circuit is stable. An Op Amp model with unity gain frequency of 8 MHz and DC gain of 120 dB is used. Parasitic capacitances at inputs are added to do it more realistic.
Fourth Order Multiple Feedback Butterworth Low-pass Filter, Step response
Fourth Order Multiple Feedback Butterworth Low-pass Filter, Step response

Conclusion


A 4th order low-pass filter can be designed using only one Op Amp. All filters parameters are linked, so sensitivity to component tolerances should be verified.

Sensitivity of the 4th order Sallen-Key topology to component tolerances is too high, so this topology cannot be recommended to use.

If relatively high output impedance is acceptable, an RC network can be added at the output to get a 5th order low-pass filter.

Unfortunately, I could not find a solution with Fully Differential Amplifier.

References


  1. Analog Devices. “Linear Circuit Design Handbook”. Chapter 8, “Analog Filters”.
  2. Nuhertz Technologies, Active Filter Module.
  3. «idealCircuit», a simulator.
  4. «Circuit Calculator», an electronics circuit design tool.


See also:
Third Order Low-pass Filter with One Op Amp
In-The-Loop Low-pass Filter
Compensation for Error Caused by Limited Gain-Bandwidth of Operational Amplifiers in Low-pass Filters
Gyrators
Active Termination Drivers
How to verify Switching-Mode Power Supply circuits
Tags:analog deviceselectronicselectronics designfiltersdiy или сделай сам
Hubs: Circuit design Manufacture and development of electronics DIY Electronics for beginners
Total votes 6: ↑6 and ↓0 +6
Views742

Popular right now

PHP / Bitrix программист
from 140,000 to 200,000 ₽Articul TechnologyRemote job
Lead .NET Developer
to 5,000 $Spiral ScoutRemote job
React Developer (remote)
from 2,400 $VelvetechRemote job
Golang Engineer
from 2,500 $Spiral ScoutRemote job
Python Developer
to 250,000 ₽TraceAirМосква

Top of the last 24 hours